Seal Coat Tanks

Skids

SR-300 Pickup Unit
SR-300 Pickup Unit

  • 300 gallon steel tank with 7 gauge head, 10 gauge sidewalls
  • Hydraulic agitation with infinitely variable speed forward and reverse
  • Full sweep 4 paddle agitation system with 3/8” rubber wiper blades on each paddle for a cleaner tank
  • 30 gallon Jenny air compressor powered by a 13 HP electric start Honda
  • 1 1/2” Wilden air-operated, dual-diaphragm pump that can handle sand – only needs to be cleaned for winterization
  • Hannay 100’ hose reel with 100’ of 3/4” 300 psi Goodyear hand hose and 6 1/2’ aluminum spray wand
  • 3 gallon filter pot for reduced spray tip clogging
  • 25” gasketed manway with sand grate, bag splitter, inner splash lid and lockable outer lid

Note: This system will fit in a long or short bed pickup, or can be mounted on the T-69 Trailer

* Available for purchase only

SR-700 Skid Unit

SR-700 Skid Unit

  • 700 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
  • 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
  • 50’ of air hose and a quick connect
  • Hydraulic agitation with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
  • 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
  • 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
  • 3 gallon filter pot that reduces down time
  • Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)

* Available for purchase only

SR-1,250 Skid Unit
SR-1,250 Skid Unit

  • 1,250 gallon steel tank with 7 gauge head, 10 gauge sidewalls and reinforced tank ends
  • 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
  • 50′ air hose and quick connect
  • Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
  • 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
  • 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
  • 3 gallon filter pot that reduces down time
  • Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)

* Available for purchase only

SR-1500 Skid Unit
SR-1500 Skid Unit

  • 1,500 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
  • 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
  • 50’ of air hose and a quick connect
  • Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
  • 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
  • 3 gallon filter pot that reduces down time
  • Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)

*Available for purchase only

SR-2000 Skid Unit
SR-2000 Skid Unit

  • 2,000 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
  • 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
  • 50’ of air hose and a quick connect
  • Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
  • 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
  • 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
  • 3 gallon filter pot that reduces down time
  • Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)

* Available for purchase only

Trailers

SR-700 Trailer

SR-700 Trailer
• 700 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
• 2 5/16” Bulldog hitch with 12,500 lb. capacity, a breakaway switch and adjustable 26,400 lb. safety chains
• Enclosed tongue and front deck with removable swing open gates on each side, with room for a blower and grazor
• 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
• 50’ of air hose and a quick connect
• Hydraulic agitation with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
• Two 6,000 lb. axles, both equipped with electric brakes and 16” load range E, 10 ply tires on 8 hole wheels
• 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
• 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
• 3 gallon filter pot that reduces down time
• Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand
• Brake lights, running lights, a center light bar and a lighted license plate bracket

Bonus Features
• Add the water tank without losing any space on your unit!
• The compressor also supplies air for your tires, allows cleaning of small cracks and runs pneumatic tools!
• The front deck is large enough to hold (2) 13 HP Billy Goat Force Blowers!
• These fenders won’t sag, no matter how many people or bags of sand you put on them!
• Enclosed storage areas in front and back of unit are great for storing smaller items such as spray tips, wrenches, screwdrivers, hammers and caution tape!

*Available for purchase only

SR-1,000 Trailer
SR-1000Trailer

SR-1,000 Trailer

The sealcoating trailer has a 1,000 gallon steel tank with 7 gauge heads, 10 gauge sidewalls and reinforced tank ends. The SR-1,000 Trailer comes complete with our hydraulic agitation system and spray system so all you need to do is add sealer and go to work.

Product Description

  • 1,000 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
  • 3” adjustable height pintle eye with 20,000lb. capacity, a breakaway switch and adjustable 26,400lb. safety chains
  • Enclosed tongue and front deck with removable swing open gates on each side that can easily hold two blowers
  • 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
  • 50’ of air hose and a quick connect
  • Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
  • Two 7,000 lb. axles, both equipped with electric brakes and 16” load range E, 10 ply tires on 8 hole wheels
  • 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
  • 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads
  • 3 gallon filter pot that reduces down time
  • Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand
  • Brake lights, running lights, a center light bar and a lighted license plate bracket

Bulk Storage Tanks

6,000 Gallon Bulk Storage Tank
6kside_trailer
6,000 Gallon Bulk Storage Tank

6,000 gallon capacity steel tank with 1/4” wall thickness

Product Description

  • 6,000 gallon steel tank with ¼” heads and sidewalls
  • 3” Roper pump equipped with a 3 gallon filter pot *Gear pumps are not designed to run sand
  • Electric start Honda GX390 (13HP) motor
  • Reinforced tank ends with 1/4” thick steel plate
  • Hydraulic agitation featuring a 4” agitation shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls all the way around for a cleaner tank
  • 20” x 10” combination 1-bolt airtight manway on top of pump end of tank
  • Expanded metal on top of sprocket chain guard and top front end of tank for added traction
  • 24” diameter x 1/4” thick steel bolted manhole below fluid level for easy clean out
  • Discount if a 2” Wilden air-operated, dual-diaphragm pump is used. Customer to have air supply.
8,000 Gallon Bulk Storage Tank
8kSinglePhaseMotorSide
8,000 Gallon Bulk Storage Tank

8,000 gallon capacity steel tank with 1/4” wall thickness

Product Description

  • 8,000 gallon steel tank with ¼” heads and sidewalls
  • 3” Roper pump equipped with a 3 gallon filter pot *Gear pumps are not designed to run sand
  • Electric start Honda GX390 (13HP) motor
  • Reinforced tank ends with 1/4” thick steel plate
  • Hydraulic agitation featuring a 4” agitation shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls all the way around for a cleaner tank
  • 20” x 10” combination 1-bolt airtight manway on top of pump end of tank
  • Expanded metal on top of sprocket chain guard and top front end of tank for added traction
  • 24” diameter x 1/4” thick steel bolted manhole below fluid level for easy clean out
  • Discount if a 2” Wilden air-operated, dual-diaphragm pump is used. Customer to have air supply.